Vibration Generator Device Based on Industrial Vibrators

Authors

  • Péter Decsi
  • István Szalai

DOI:

https://doi.org/10.33927/hjic-2020-10

Keywords:

industrial vibrator, vibration generator, test equipment

Abstract

A low-cost vibration generator device based on industrial vibrators was designed. The control software was implemented in LabVIEW Environment. The device is able to generate an oscillating force of 8 kN and an amplitude of up to 4 mm at a frequency of 50 Hz to model low-amplitude, high-frequency vehicle vibrations. A National Instruments myRIO device was responsible for data acquisition, with which a signal of a piezoelectric accelerometer was detected. The test results show that the device is able to generate a sinusoidal harmonic acceleration.

Author Biographies

  • Péter Decsi
    Institute of Mechatronics Engineering and Research, University of Pannonia, Gasparich Márk utca 18/A, Zalaegerszeg, 8900, HUNGARY
  • István Szalai
    Institute of Mechatronics Engineering and Research, University of Pannonia, Gasparich Márk utca 18/A, Zalaegerszeg H-8900, HUNGARY

Downloads

Published

2020-07-06

Issue

Vol 48, No 1 (2020): Hungarian Journal of Industry and Chemistry

Section

Articles

How to Cite

Vibration Generator Device Based on Industrial Vibrators. (2020). Hungarian Journal of Industry and Chemistry, 48(1), 67-70. https://doi.org/10.33927/hjic-2020-10

Most read articles by the same author(s)