Highly Effective Coating Systems with Special Corrosion Resistance Requirements as Replacements for Wash Primer in Coating Systems Containing Hexavalent Chromium

Authors

  • Eva Jančová Vojenský výzkumný ústav, Veslařská 230, 637 00 Brno, Czech Republic, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 166 07 Prague 6, Czech Republic
  • Jiří Kuchař Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 166 07 Prague 6, Czech Republic
  • Ladislav Kolařík Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 166 07 Prague 6, Czech Republic
  • Andréa Kalendová Faculty of Chemical Technology, University of Pardubice, Studentská 95, 532 10 Pardubice, Czech Republic

DOI:

https://doi.org/10.33927/hjic-2026-33

Keywords:

organic coating, anticorrosion pigments, modified phosphates, hexavalent chromium, environmentally friendly coating systems

Abstract

Effective anticorrosion surface protection in environments with high corrosion rates and high climatic and chemical aggressiveness of the surrounding atmosphere and pollutants, through the use of paints and organic coatings with environmentally friendly and effective anticorrosion pigments, remains a challenge. One such example is the protection of metal surfaces of ground military equipment. Currently, surface protection in this area is still achieved, among other means, using epoxy resin-based coatings containing hexavalent chromium-based anticorrosion pigments, which are toxic and can cause health problems, including cancer. To date, coating systems containing hexavalent chromium are still permitted under exemptions in the field of ground military technology and materials. This paper deals with the formulation and testing of new coating systems in which the developed epoxy resin-based primers contain pigments based on chemically modified phosphates, while existing pigmented polyurethane-based topcoats are used. The aim of the work was to formulate highly effective corrosion protection using coating systems with high adhesion. A total of five coating systems with anticorrosion pigments based on modified phosphates and one coating system with a reactive base based on hexavalent chromium were prepared and tested. Corrosion resistance tests were conducted in a neutral salt spray environment. The results show that the MP-1 and MP-4 coating systems with anticorrosion pigments (Zinc Aluminum Orthophosphate Hydrate + Zinc-5-Nitroisophthalate) and (Zinc Aluminum Molybdenum Orthophosphate Hydrate) demonstrate high corrosion resistance comparable to that of a coating system with an anticorrosion pigment based on hexavalent chromium. These coating systems also show high adhesion, low corrosion from cuts, and compliance with the corrosion resistance requirements for coating systems for military use on ground military equipment and materials according to military standard ČOS 801001.

Downloads

Published

2026-11-19

How to Cite

Jančová, E., Kuchař, J., Kolařík, L., & Kalendová, A. (2026). Highly Effective Coating Systems with Special Corrosion Resistance Requirements as Replacements for Wash Primer in Coating Systems Containing Hexavalent Chromium. Hungarian Journal of Industry and Chemistry, 54(2), 105-115. https://doi.org/10.33927/hjic-2026-33