Comparative Study of Thermally Modified Peat and Bark-Based Substrates for Heavy Metal Removal from Wastewater

Authors

  • Semaghiul Birghila Chemical and Chemical Engineering Department, Ovidius University Constanta, University Street, 1, 900470, Constanta, ROMANIA
  • Timur-Vasile Chis Oil and Gas Engineering Faculty, Petroleum-Gas University Ploiesti, Bucuresti Blv. 39, 100680, Ploiești, ROMANIA
  • Nicoleta Matei Chemical and Chemical Engineering Department, Ovidius University Constanta, University Street, 1, 900470, Constanta, ROMANIA
  • Ana Maria Agiu Chemical and Chemical Engineering Department, Ovidius University Constanta, University Street, 1, 900470, Constanta, ROMANIA
  • Anamaria Niculescu (Ilie) Chemical and Chemical Engineering Department, Ovidius University Constanta, University Street, 1, 900470, Constanta, ROMANIA
  • Monica Tegledi Cibernetical, Informatical, Economical, Statistical and Accounting Department, Petroleum-Gas University Ploiesti, Bucuresti Blv. 39,100680, Ploiești, ROMANIA
  • Dragos Cristea Oil and Gas Engineering Faculty, Petroleum-Gas University Ploiesti, Bucuresti Blv. 39, 100680, Ploiești, ROMANIA

DOI:

https://doi.org/10.33927/hjic-2026-30

Keywords:

metals, natural sorbents, peat, bark, modelling, atomic absorption spectrometry

Abstract

Wastewater generated from drilling fluid treatment, oil exploitation, and refinery processes is strongly contaminated with heavy metals, necessitating efficient remediation strategies. This study investigates the effectiveness of two thermally modified natural sorbents – potting soil (bark) and peat – for the removal of Cu, Cr, Cd, and Pb from industrial effluents. Both materials were thermally treated at 105 °C to achieve a stable hydrophobic state before testing their retention efficiency over a 24-hour period. Metal concentrations were determined using flame atomic absorption spectrometry (FAAS) for Cu(II) and graphite furnace atomic absorption spectrometry (GFAAS) for Cd, Pb, and Cr. Results indicated that the bark-based substrate achieved superior retention, particularly for Pb and Cr, reaching near-quantitative removal (>99%) within the first hour. In contrast, peat showed lower efficiency for Cd (15%) compared with the 97% achieved by the modified bark. A numerical model using fourth-order polynomial equations was developed to simulate adsorption kinetics, revealing that the superior performance of the bark-based material is linked to its higher hydrophobicity and favorable pH. This study demonstrates that modified natural sorbents offer a sustainable and cost-effective alternative to conventional chemical or thermal separation technologies.

Downloads

Published

2026-11-19

How to Cite

Birghila, S., Chis, T.-V., Matei, N., Agiu, A. M., Niculescu (Ilie), A., Tegledi, M., & Cristea, D. (2026). Comparative Study of Thermally Modified Peat and Bark-Based Substrates for Heavy Metal Removal from Wastewater. Hungarian Journal of Industry and Chemistry, 54(2), 77-85. https://doi.org/10.33927/hjic-2026-30